Available Models
- SBE-84-250L-GS-LT-WF01 EVAPORATION
- SBE-84-345-GS-LT-WF01 EVAPORATION
- SBE-86-250L-GS-LT-WF01 EVAPORATION
- SBE-84-245-GS-LT-WF01 EVAPORATION
- SBE-82-245-GS-LT-WF01 EVAPORATION
- SBE-86-150L-GS-LT-WF01 EVAPORATION
- SBE-84-150L-GS-LT-WF01 EVAPORATION
- SBE-84-145-GS-LT-WF01 EVAPORATION
- SBE-82-145-GS-LT-WF01 EVAPORATION
> Copper pipes Ø3 / 8 “,
> Fin material is aluminum,
> 4-6-8 mm between lamella,
> Inlet – outlet collector material is copper,
> Highest permissible working pressure Ps = 24 Bar.
> Low noise and maintenance-free fans are used.
> Protection class IP44 / 54, Single phase 230V 1 ~ 50Hz,
> Fan construction isolation material class F / B, working temperature -30 ° C Between + 40 / + 55 ° C,
> Fan motors should be operated for 2 hours every month for long-term standby situations.
> Integrated thermistors must be used for motor protection,
> In low temperatures and if the air resistance changes, the electrical power drawn by the fans increases.
> Depending on the temperature used (+ 2 ° C / -5 ° C) there are HT or (–2 ° C / –25 ° C) LT type electric defrost options,
> Hot gas defrost preparation (hot gas defrost in the battery and pan part piping is optional),
> Water defrost.